Drying Rack - Maytag Atlantis MDG7400A User Manual

Drying Rack

Using the Drying Rack:
The drying rack allows you to dry items that you
don't want to tumble dry; for example, sneakers,
washable sweaters, stuffed toys or pillows, etc.
The rack remains stationary, but the drum rotates.
(Make sure nothing hangs over the edges of the
rack.)
To Use Rack:
1. Open dryer door.
2. Position drying rack in tumbler with the two
extension wires toward you. These wires will brace
the rack against the front surface of the tumbler.
Legs will rest on front ledge and at back of drum.
3. Place wet items on the rack, leaving space between
them so air can reach all surfaces.
4. Close dryer door.
5. Use the Time Dry cycle or use IntelliDry Regular
Fabrics cycle. Select time according to moisture and
weight of item. Pull the control dial out to start. It
may be necessary to reset the controls if a longer
drying time is needed.
To Remove Rack:
1. Open dryer door.
2. Lift rack straight up and out.
Note: If not included with your dryer, contact
your Maytag dealer for the accessory kit
MAL1000AXX or call 1-877-232-6771 USA and
1-800-688-8408 Canada.
(select models)
SUGGESTED ITEMS
Washable sweaters (block to
shape and lay flat on rack)
Stuffed toys or pillows
(cotton or polyester
fiber filled)
Stuffed toys*
(foam or rubber filled)
Foam rubber pillows*
Sneakers
*WARNING – When drying foam rubber, plastic
or rubber with heat, it is possible they will suffer
damage and could lead to a fire hazard.
SUGGESTED
TEMPERATURE
SETTINGS
Heat
Heat
Air Fluff
Air Fluff
Air Fluff or Heat
8