Cm2 Junction Box Din Rail Mounting - Viessmann Vitogate 300 Nstallation And Service Instructions

Installation

CM2 Junction Box DIN Rail Mounting

Legend
A Junction box side DIN rail 3 in. (75 mm)
B Power supply unit
C Vitogate 300
D Junction box main DIN rail
8
Vitogate 300 Installation and Service
1. Measure to allow for clearances as shown, than use
the DIN rail as a template to mark and centre punch
hole locations.
2. Drill two holes 7 /
3
16
3. Mount the DIN rail A with the mounting hardware to
the inside of the junction box as shown.
4. Mount the Vitogate 300 C to junction box side DIN
rail A and mount the power supply unit B to the
junction box main DIN rail D.
in.