Advertisement
Contents
Connections
o Desired sound does not come out
Symptom
Left/right volume balance is
0
unbalanced.
No sound from the sub
0
woofer.
0
Set values are not reflected
0
in "SDB (Super Dynamic
0
Bass)", "BASS" and
"TREBLE".
Headphone volume is low.
0
o Audio from digital devices cannot be played back (Optical)
Symptom
"SIGNAL UNLOCK" is
0
displayed.
0
Front panel
Display
Playback
Press the SDB/TONE button on the remote control to adjust the balance.
Check the subwoofer connections.
Switch the subwoofer power on.
"SDB (Super Dynamic Bass)", "BASS" and "TREBLE" setting values are not reflected in subwoofer out.
Set "OFF" to the "S.DIRECT".
Switch "H/P AMP GAIN" to "MIDDLE" or "HIGH" if using headphones with high impedance or low
sensitivity.
When digital audio signals cannot be detected properly, "SIGNAL UNLOCK" is displayed.
"SIGNAL UNLOCK" is displayed when audio signals that are not supported by this unit are input. Check
the audio output signal format from your digital device.
Rear panel
Settings
Cause / Solution
Cause / Solution
57
Remote
Tips
Appendix
Page
Page
Index
42
19
－
42
42
49
39
39
Advertisement
