Advertisement
Contents
Connections
o LED is flashing
Symptom
Flashing red. (Flashes at
0
0.25 second intervals)
Flashing red. (Flashes at
0
0.5 second intervals)
0
Front panel
Display
Playback
The amplifier circuit in the unit has malfunctioned. Disconnect the power and contact the repair center.
Protection circuit activated due to a rise in internal temperature. Turn off the power, wait for the set to fully
cool down, then turn the power back on.
Core wires of two speakers are touching each other or a core wire is sticking out of the terminal and
touching the set's rear panel, activating the protection circuit. First unplug the power cord, then twist the
core wires tightly or terminate the speaker cables, then reconnect.
Rear panel
Settings
Cause / Solution
54
Remote
Tips
Appendix
Page
Index
－
68
68
Advertisement
