Lenovo 20EQS1LG00 User Manual page 88

Table 2. Config menu items (continued)
Menu item
Beep and Alarm
RAID
72
ThinkPad P50 User Guide
Submenu item Value
ExpressCard Speed • Generation 1
• Automatic
PCI Express Power • Enabled
Management
• Disabled
Power On with AC • Disabled
Attach
• Enabled
Password Beep • Disabled
• Enabled
Keyboard Beep • Enabled
• Disabled
RAID Mode Option • Disabled
• Enabled
RAID Storage • SATA HDD
• M.2 SSD
Intel Rapid Storage
Technology User
Interface
Comments
Set the transfer speed of the ExpressCard
to the desired level of performance.
• Generation 1: Some ExpressCards
are not Generation 2 aware, thus
incorrectly respond that they can
handle the higher transfer speed.
• Automatic: It allows the ExpressCard
to specify which transfer speed they
support.
Enables or disables a feature
that automatically adjusts power
management when there is no PCI
Express activity. Normally, it is not
necessary to change this setting.
Enable or disable a feature that powers
on the system when the ac power
adapter is attached.
If you select Enabled, the system is
powered on when the ac power adapter
is attached. When the system is in
hibernate state, the system resumes.
If you select Disabled, the system is not
powered on nor resumed when the ac
power adapter is attached.
Enable this option to have a beep
sound when the system is waiting for
a power-on, hard disk, or supervisor
password. Different beeps will sound
when the entered password matches
or does not match the configured
password.
Enable or disable keyboard beep when
unmanageable key combinations are
pressed.
Select the mode in which the serial SATA
controller operates:
Enabled: RAID mode.
Disabled: AHCI mode.
Note: This option is available if RAID is
supported.
Note: This option is available when RAID
is enabled.
Enter Intel Rapid Storage Technology
Configuration Utility to manage RAID
volumes on the Intel RAID Controller
Note: This option is available if RAID is
supported.