Lenovo 20EQS1LG00 User Manual page 86

Table 2. Config menu items (continued)
Menu item
Keyboard/Mouse
Display
70
ThinkPad P50 User Guide
Submenu item Value
TrackPoint • Disabled
• Enabled
Trackpad • Disabled
• Enabled
Fn Sticky key • Disabled
• Enabled
F1–F12 as primary • Disabled
function
• Enabled
• Disabled
Fn and Ctrl Key swap
• Enabled
Boot Display Device • ThinkPad LCD
• DisplayPort
• Display on dock
Graphics Device • Discrete
• Hybrid
Comments
Enable or disable the built-in TrackPoint
pointing device.
Note: If you want to use an external
mouse, select Disabled.
Enable or disable the built-in trackpad.
Note: If you want to use an external
mouse, select Disabled.
When the option is enabled, you can
press the Fn key to keep it in a pressed
condition; then press the desired
function key. The action is equivalent to
pressing the required key simultaneously
with the Fn key. When you press the Fn
key twice, the state is locked until you
press the Fn key again.
Enable the F1-F12 function or the special
function printed as an icon on each key
as the primary function.
Enabled: Executes the F1-F12 function.
Disabled: Executes the special function.
To temporarily switch the above two
options, press Fn+Esc to enable FnLock.
The FnLock indicator is on when FnLock
is enabled.
Enable exchanges of Fn and Ctrl key
action at the bottom-left of the keyboard.
Disabled: Fn key and Ctrl key behavior
is as printed on the keyboard.
Enabled: Fn key works as Ctrl key. Ctrl
key works as Fn key.
Select the display device that is to be
activated at boot time. This selection
is effective for boot time, password
prompt, and ThinkPad Setup.
Enable the Discrete Graphics mode or
Graphics
the Hybrid Graphics mode.
Discrete Graphics mode provides better
Graphics
graphics performance.
Hybrid Graphics mode works as
integrated graphics and it consumes less
battery power.