4. Open the latches on both sides of the memory slot at the same time
module
2
.
5. Place the notched end of the new memory module toward the contact edge side of the memory slot.
Then insert the memory module into the slot at an angle of about 20 degrees
module downward until it snaps into place
the slot and cannot be moved easily.
Attention: Do not touch the contact edge of the memory module. Otherwise the memory module
might get damaged.
Note: If you install only one memory module, install it into the bottom slot.
6. Reinstall the removable battery. See "Replacing the removable battery " on page 115.
7. Reinstall the bottom cover. See "Replacing the bottom cover" on page 118.
8. Turn the computer over again. Connect the ac power adapter and all cables.
2
. Ensure that the memory module is firmly installed in
1
, and then remove the memory
1
. Pivot the memory
.
Chapter 10
Replacing devices
127