Lenovo 20EQS1LG00 User Manual page 139

Slot Slot label on computer
a
Slot 0
b
Slot 1
To replace the M.2 solid-state drive, do the following:
1. Turn off the computer; then disconnect the ac power adapter and all cables from the computer. Wait
three to five minutes to let the computer cool.
2. Close the computer display and turn the computer over. Then remove the removable battery. See
"Replacing the removable battery " on page 115.
3. Remove the bottom cover. See "Replacing the bottom cover" on page 118.
4. Remove the screw that secures the M.2 solid-state-drive tray
M.2 solid-state drive out
Corresponding menu selection in ThinkPad Setup
ATA HDD2 or NVMe0
ATA HDD3 or NVMe1
2 .
1 , and then pull out the tray with the
.
Chapter 10 Replacing devices
123