Cancelling A Running Programme; Hints And Tips - Zanussi ZWF 71440W User Manual

Table of Contents

Advertisement

Available languages

Available languages

CANCELLING A RUNNING PROGRAMME

1. Turn the programme knob to position
cancel the programme and to deactivate the
appliance.
2. Turn the programme knob again to activate the
appliance. Now, you can set a new washing
programme.
Before starting the new programme
the appliance could drain the water. In
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
OPENING THE DOOR
While a programme or the delay start operates, the
appliance door is locked.
CAUTION! If the temperature and
level of the water in the drum are too
high and the drum still rotates, you
cannot open the door.
To open the door during the first minutes of the
cycle or when the delay start operates:
1. Press the button Start/Pauze Départ/Pause to
pause the appliance.
2. Wait some minutes until the door unlocks.
3. You can open the door.
4. Close the door and touch the button Start/
Pauze Départ/Pause again. The programme (or
the delay) continues.
AT THE END OF THE PROGRAMME
The appliance stops automatically.
The indicator of the button Start/Pauze Départ/
Pause goes off. After a couple of minutes the
phase indicator
Turn the programme knob to position
deactivate the appliance.

HINTS AND TIPS

THE LAUNDRY LOAD
Divide the laundry in: white, coloured,
synthetics, delicates and wool.
Obey the washing instructions that are on the
laundry care labels.
Do not wash together white and coloured items.
Some coloured items can discolour with the first
wash. We recommend that you wash them
separately for the first times.
Button up pillowcases, close zippers, hooks and
poppers. Tie up belts.
12
illuminates and stays on.
to
You can open the door.
Remove the laundry from the appliance. Make
to
sure that the drum is empty.
Close the water tap.
Keep the door and the detergent drawer ajar, to
prevent the mildew and odours.
The washing programme is completed, but
there is water in the drum:
The drum turns regularly to prevent the creases
in the laundry.
The indicator
drain the water.
The indicator of the button Start/Pauze Départ/
Pause is off. The door is locked.
You must drain the water to open the door.
Draining the water:
1. Set a draining (Pompen/Vidange) or a spinning
(Centrifugeren/Essorage) programme.
2. Press the button Start/Pauze Départ/Pause.
The appliance drains the water and spins.
3. When the programme is completed:
The indicator of the button Start/Pauze
Départ/Pause goes off and after a couple of
minutes the phase indicator
You can open the door.
4. Turn the programme knob to the position
deactivate the appliance.
STAND BY
Some minutes after the end of the washing
programme, if you do not deactivate the appliance,
the energy saving status activates. The energy
saving status decreases the energy consumption
when the appliance is on the standby:
All indicators go off.
The indicator of the button Start/Pauze Départ/
Pause flashes slowly.
Press one of the buttons to deactivate the energy
saving status.
Empty the pockets and unfold the items.
Turn inside out multilayered fabrics, wool and
items with painted illustrations.
Remove hard stains.
Wash with a special detergent heavy soil stains.
Be careful with the curtains. Remove the hooks
or put the curtains in a washing bag or
pillowcase.
Do not wash in the appliance laundry without
hems or with cuts. Use a washing bag to wash
small and/or delicate items (e.g. underwired
bras, belts, tights, etc. ).
stays on to remind you to
illuminates.
to

Advertisement

Table of Contents
loading

Table of Contents