Table of Contents
Advertisement
Getting started
Telephone installation
If you subscribe to high-speed Internet service (DSL - digital
subscriber line) through your telephone lines, you must install a
DSL filter between the telephone line cord and the telephone wall
jack. The filter prevents noise and caller ID problems caused by
DSL interference. Please contact your DSL service provider for more
information about DSL filters.
Install the telephone as shown below:
1.
Plug one end of the coiled
handset cord into the handset
jack on the left side of the
telephone base. Plug the other
end into the handset.
2.
One end of the telephone line
cord has been installed into the
telephone jack at the bottom of
the telephone base. Route the
telephone line cord through the
slot as shown.
3.
Plug the other end of the cord
into a telephone wall jack.
4.
Put the handset on the
telephone base.
8
If you have DSL high-speed
Internet service, a DSL filter
(not included) is required.
The DSL filter must be
plugged into the telephone
wall jack.
Advertisement
Table of Contents
