4.
Installation of the stitching table
Installation of stitching table: flat stitching
With the lever 1 lift all stitching heads to the highest position. Slide the stitching table
2 with the small side into the machine. Move it with both handles 3 right and left over
the centering discs 4 . Put down the stitching table until it will be supported. Push the
triangle-handles 5 upwards and tighten them.
Installation of the stitching table: for brochure stitching
With the lever 1 lift all stitching heads to the highest position. Slide the stitching table
2
with the small side into the machine. Tilt the stitching table downwards to 45
degrees. Move the stitching table with both fixed angle-supports over the centering
discs 4 . Put down the stitching table until it will be supported. Push the triangle
handles 5 upwards and tighten them.
Hohner Maschinenbau GmbH – ORION 4
Important!
The „stick-on-level" 8 on the front panel 7 shows, how to fix the
safety guard 6 in the two way position of the stitching table.
- 7 -