Basic Adjustment Of Clinchers - Hohner ORION 4 Operating Instructions/Spare Parts List

7.

Basic adjustment of clinchers

In case of replacement or retrofit of the stitching heads UNIVERSAL 70/20 and the
clincher boxes a basic adjustment will be necessary.
The pressure of the clincher spine pressure must be adjusted at minimal pressure
(correspond to 2-sheet-stitching). See page 8.
Adjustement:
Loosen the allen set screw 1 . Cycle the machine by hand (see page 10) until the
clincher points reach their highest position. Adjust the clincher pusher screw 2 until
the center of the clincher points are approx. 1 mm above the clincher box surface.
Tighten the allen set screw 1 .
Hohner Maschinenbau GmbH – ORION 4 - 10 -