Advertisement
Step 11
Oil filling after assembling the tool:
Connect the tool to the source of CA! Press and release the trigger several times.
Disconnect the tool from the source of CA! Unscrew pos. 11 with socket-screw key no.3. Fill
hydraulic oil (from the supplied bottle with hydraulic oil) into MP53, take extra care to avoid air
sucking, air must not be present in the hydraulic oil. Screw the MP53 tool into pos. B9 and inject
the hydraulic oil into the tool. When the moving part of MP53 tool is released, the redundant oil is
returned back to the MP53 tool. Unscrew MP53, screw pos. 11 with pos. 10 back to pos. B9 and
tighten with using socket-screw key no.3.
- 19 -
Advertisement
