Advertisement
4. Proper function of riveting tool:
Operator activity
Connect the riveting tool to CA, if the tool is
equiped with main valve, turn it on. Pos. 70
is on the front extreme position, not pressed
Put a rivet on pos. 1 and press towards the
riveting tool, the rivet screws on
The action is ready when the rivet is
completely screwed on
Press with hand pos. 23, the rivet screws out
Release pos. 23, screwing out stops
Turn with stroke force adjustement
according to arrow direction +/-. Further
instructions are in the Operations manual
Put a rivet on pos. 1 and press towards the
riveting tool, the rivet screws on
Press pos. 70, the rivet is riveted in
Stop pressing pos. 70, the rivet completely
screws out
Tool function
CA does not leak, motor does not rotate
Motor turns right, outlet of CA through the
outlets in pos. 23
Motor turns off, front of the rivet touches front of
the pos. 2. CA does not leak
Motor turns left, outlet CA through the outlets in
pos. 23
Pos. 23 gets back to the initial position, motor
turns off, air does not leak
The indicator of the manometer moves
Motor turns right, outlet of CA through the
outlets in pos. 23, when the rivet is completely
screwed on the motor turns off
The rivet is deformed, the movement ends when
the set stroke force is reached
CA outlets from the space pos. B40, pos. 1 gets
back, the motor turns, outlet of CA through the
outlets ins pos. 23, in the end motor stops itself,
CA does not leak
- 5 -
Advertisement
