Setup; Onscreen Display Menu System - Marantz SR6001 User Manual

SETUP

After all components are connected, initial setup
must be performed.

ONSCREEN DISPLAY MENU SYSTEM

The SR6001 incorporates an onscreen menu system,
which makes various operations possible by using
the cursor (3, 4, 1 , 2) and ENTER buttons on the
remote control unit or on the front panel.
Note:
• To view the onscreen displays, make certain you
have connected the MONITOR OUT jack on the rear
panel to the composite, S-Video, component video
or HDMI input of your TV or projector. (See page
19, 20)
1.
Press the AMP button on the remote control
unit. (This step is not needed when operating
the setup menus from the SR6001.)
2.
Press the MENU button on the remote control
or press the MENU button on the front panel.
The "MAIN MENU" of the OSD menu system is
displayed.
There are 6 items in the MAIN MENU.
3. Select the desired sub-menu with the 3 or 4
cursor buttons and press the ENTER button.
The display will change to the selected sub-
menu.
Notes:
• If you desire to adjust any sub-menu, you need to set
it to UNLOCKED.
• To lock sub-menus, set items 1-6 on the MAIN
MENU to "LOCKED".
<LOCKING SUBMENUS>
(1) Move the cursor to "1. INPUT SETUP" in the
MAIN MENU.
(2) Select the "0" mark left of "LOCKED" with the 1
or 2 cursor buttons.
4.
To exit from OSD menu system, press the
EXITbutton, or move the cursor to EXIT and
press the ENTER button.
Note:
• Settings are entered with the ENTER button on the
unit or the remote control unit.
26
RC5001SR BUTTON CONTROL
INFO
LEFT button
T.TONE
ENTER button
/SET UP
REC
SR6001 FRONT BUTTON CONTROL
MULTI
AUTO MULTI SPEAKER
7.1CH INPUT
HT-EQ
LEFT button
MENU
MENU button
Press this button to display the
DOWN button
OSD menu system.
MULTI/ CAT M-SPKR
UP button
MENU
MENU button
Press this button to display the
OSD menu system.
ENTER
RIGHT button
EXIT
EXIT button
Press this button to exit the OSD
T.DISP PTY F.DIRECT menu system.
DOWN button
UP button
ENTER button
BAND T-MODE MEMORY
DISPLAY
MultEQ
RIGHT button
ENTER
EXIT
MIC
EXIT button
Press this button to exit the
OSD menu system.
TUNER CD CDR MD
TAPE
AUX1 AUX2 AMP
REMOTE CONTROLLER
RC5001SR
AMP (Amplifi er) button