Further Information - Panasonic nanoeX F-GPT01A Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
TROUBLESHOOTING
If a problem is encountered, please investigate it by going through the following items.
If the problem still persists, be sure to unplug the USB power cord from the main unit.
Please contact the dealer for repair.
Possible situation
The operation
indicator is
blinking.
The operation
indicator goes
dim.

FURTHER INFORMATION

Conditions for nanoe
nanoe
X is generated by using the air in the room. Therefore, due to the differences
TM
in temperature and humidity nanoe
Room temperature: about 5 ℃~35 ℃ (dew-point temperature: 2 ℃ or above)
Relative humidity: about 30%~85%
When nanoe
X is generated, small amount of ozone will be released. However, the
TM
amount of ozone generated is far smaller than that of ozone present in a forest, which
is not be harmful to human beings.
About nanoe
The so-called nanoe™ X are charged water purification particles
generated by applying high voltage to separate water molecules.
nanoe™ X features: high moisture content, small particles,
high stability, etc.
1. High moisture content (the moisture content is 1,000 times the moisture content of
ordinary anions)
2. Small particles (about 5 nm - 20 nm (nanometers) in size, able to penetrate deep
into the fiber and stratum corneum)
3. High stability (6 times more stable than a common ion, covering a distance of 10 m
or above)
4. More hydroxyl radicals (up to 4,800 billion of radicals are generated per second)
5. Weak acidity (with weak acidity features close to that of hair and skin)
All of the above features have been tested by SGS-CSTC Standards Technical
Services Co., Ltd.
Note: nanoe
and the nanoe
TM
nanoe™ X are particulate ions containing hydroxyl radicals whose amount is
10 times that of nanoe™.
The circuit fails.
Be sure to unplug the USB power cord from the main unit.
Please contact the dealer for repair.
Is a power supply with the maximum output current lower than
1.5 A used?
Please use a power supply with the maximum output current
of 1.5 A or above.
X generation.
TM
Comes with the nanoeTM X technology
X
TM
mark are trademarks of Panasonic Corporation.
TM
Please confirm the following
About nanoe
X
TM
X may not be generated stably.
TM
9

Advertisement

Table of Contents
loading

Table of Contents