Operation; Power Off/On; Maintenance - Panasonic nanoeX F-GPT01A Operating Instructions Manual

HOW TO USE
2
Connect the power supply.
Before connect the power supply, please make sure the maximum output current is
●
1.5 A or more.
Insert the USB power plug into the USB socket.
●
Portable power bank
Do not use any input
voltage other than 5 V
(Otherwise, a fire may be
caused.)
Notice
When the product is used in a car, please do not use the same power supply for it
and other electric appliance.
3

Operation

Notice
The product can operate only when the USB power cord is connected.
●
When the product is used in a car, the product may keep running even after the car key
●
is pulled out or the engine switch is turned off. To prevent battery consumption, unplug
the USB power cord.

MAINTENANCE

Precautions before maintenance
Be sure to unplug the USB power cord from the main unit.
To maintain the performance of nanoe
degree of dirtiness of the filter may vary with the operating environment. Please clean
the filter approximately once every two weeks or whenever it is clogged by dust or dirt.
When using chemically treated cloth,
●
please follow the instructions.
Do not use the detergents
●
shown in right.
USB adapter
WARNING
.

"Power Off/On"

button
TM
USB socket
USB plug
Car USB device
Do not use any power supply
with the maximum output
current lower than 1.5 A.
(Otherwise, malfunction or fire
may be caused.)
Power Off/On
Turn the product on or off.
Press the button to turn the product on.
Press the button again, the product
stops operating.
X, frequent care is required for the filter. The
Polish
7