Exmark COMMERCIAL 30 Setup Instructions page 2

Before each use, ensure that the oil level is between the
Add and Full marks on the dipstick
1. Dipstick
2. Full
Important: Do Not operate the engine with the oil
level below the "LOW" (or "ADD") mark on the
dipstick, or over the "FULL" mark.
Check the Cable Adjustments
Follow the procedures in the Operator's manual to
ensure the self-propel drive and BBC cables have been
adjusted properly.
Check the Blade Control Lock
Lever
Check the operation of the blade control lock lever; see
the Operator's manual for adjustment.
Filling Out the Product
Registration
Fill out the online warranty registration form.
Figure 2
3. Add
2