Removing A Media Card Reader - Dell XPS 410 Service Manual

Removing a Media Card Reader

CAUTION:
NOTICE:
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
1. Follow the procedures in
2. Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
3. Remove the computer cover (see
4. Remove the drive panel (see
5. Remove the drive panel insert (see
1 Media Card Reader (optional)
6. Disconnect the USB cable from the back of the Media Card Reader. Disconnect the other end of the cable from the USB connector from the system board
(see System Board
1 sliding plate
7. Pull the sliding plate to the right and hold in place. Then, slide the drive out the front of the computer.
Great user manuals database on
Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
Before You Begin.
Removing the Computer
Removing the Drive
Removing the Drive-Panel
Components). Remove the cable from any clips and lift out of the computer.
2 sliding plate lever 3 Media Card Reader (optional)
UserManuals.info
Cover).
Panel).
Insert).
2 USB cable