Dell XPS 410 Service Manual page 36

1. Follow the procedures in
2. Remove the computer cover (see
3. If you are installing a new drive, unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that the drive is configured for your computer.
4. If you are installing a new drive, remove the drive panel insert (see
inside of the drive-panel insert and attach the screws to the new drive.
1 CD/DVD drive
5. Slide the drive into the drive bay until the drive clicks into position.
6. Connect the power cable to the drive and the CD/DVD cable to the drive and system board.
1 CD/DVD cable
7. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
8. Replace the computer cover (see
NOTICE:
9. Connect your computer and devices to their electrical outlets, and then turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
10. Enter system setup (see
11. Verify that your computer works correctly by running the Dell Diagnostics (see
Battery
Great user manuals database on
Before You Begin.
Removing the Computer
2 shoulder screws (3)
2 power cable
Replacing the Computer
To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the computer.
Entering System Setup) and select the appropriate Drive option.
UserManuals.info
Cover).
Removing the Drive-Panel Insert). Then, remove three shoulder screws from the
3 system board
Cover).
Dell Diagnostics).