Steps
Insert the coin-cell battery into the socket with the positive side (+) label facing up and snap the battery in the socket.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Media-card reader
Removing the media-card reader
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5-inch hard drive
5. Remove the
3.5-inch hard drive
6. Remove the
disk-drive
About this task
The following image indicates the location of the media-card reader and provides a visual representation of the removal
procedure.
After working inside your
Before working inside your
if applicable.
if applicable.
cage.
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs)
69