Table of Contents
Advertisement
User -Specific Settings
4.1
The Setup Program
The Setup program is in the ROM BIOS. The system configuration settings are
stored in the operator panel's battery-protected memory.
You can use Setup to define the system configuration (e.g. hard disk type) and
system properties. Setup is also used to set the system date and time on the
clock module.
Before you can modify Setup, you have to connect an external keyboard.
Caution
!
The OP37/Pro is preconfigured for work with the software supplied with it.
You should only alter the existing settings if you have made technical modifi-
cations to the unit.
Starting Setup
Following the OP self-test, BIOS gives you an opportunity to start Setup so
that you can alter specific system settings.
To start Setup, press DEL during the boot process as soon as you are prompted
to on the screen.
Setup main menu
When Setup starts, you are first presented with the Setup Main Menu from
where you can switch to the individual Setup screens.
Figure 4-1
4-2
ROM PCI/ISA BIOS (2A59F000)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
Esc : Quit
F10 : Save & Exit Setup
Time, Date, Hard Disk Type ...
Setup Main Menu
INTEGRATED PERIPHERALS
PASSWORD SETTING
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
: Select Item
(Shift)F2 : Change Color
OP37/Pro Equipment Manual
Release 7/98
Advertisement
Table of Contents
