Memory Locations - Cobra microTALK PR5000DX Owner's Manual

Mode Functions
Operation
Voice Activated Transmit (VOX)
In VOX mode, your microTALK ®
automatically transmitting when you speak. You can set the VOX
sensitivity level to fit the volume of your voice and avoid
transmissions triggered by background noise.
To turn VOX mode on or off:
Lock/Mode Button
1. Press the Lock/Mode button until the VOX
icon flashes on the display. The current on
or off setting is displayed.
2. Press the Channel Up or Channel Down
VOX Icon
button to turn VOX on or off.
3. Choose one of the following:
a. Press the Lock/Mode button to enter the
selected on or off setting and proceed to
Channel Buttons
other functions.
b. Press the Hi•Low/Enter button to enter
the selected on or off setting and return
to Standby mode.
To set VOX sensitivity:
Lock/Mode Button
1. Press the Lock/Mode button until the VOX
icon flashes and the current sensitivity level
is displayed.
The current sensitivity level is displayed
VOX Sensitivity Level
with letters "LE" and a Number 01
through 05, with Number 05 being the
most sensitive level and Number 01
being the least sensitive level.
Channel Buttons
2. Press the Channel Up or Channel Down
button to change the setting.
3. Choose one of the following:
a. Press the Lock/Mode button to enter
the selected setting and proceed to
other functions.
b. Press the Hi•Low/Enter button to
enter the selected setting and return
to Standby mode.
12 English
radio can be used "hands-free,"
Introduction

10 Memory Locations

•
Your microTALK ®
your most frequently used channels and channel/privacy code
combinations. These Memory Locations can be selected individually
or can be scanned. (See page 20 for memory location scan.)
Lock/Mode Button
Memory Icon
Channel Buttons
Hi•Low/Enter Button
Operation Customer Assistance Warranty
radio has 10 Memory Locations for storing
To program a memory location:
1. Press the Lock/Mode button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down
button to select the memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3. Press the Hi•Low/Enter button to enter
a new memory location or edit an already
programmed memory location. The channel
numbers will flash on the display.
4. Press the Channel Up or Channel Down
button to select a channel (1 through 22).
5. Press the Hi•Low/Enter button.
The CTCSS icon and privacy code
numbers will flash on the display.
6. Press the Channel Up or Channel Down
button to select a CTCSS privacy code
(01 through 38) for the channel.
Nothing Comes Close to a Cobra
•
® 13