Mode Functions - Cobra microTALK PR5000DX Owner's Manual

Mode Functions

Operation
Scrolling through Mode Functions
By scrolling through the Mode Functions, you will be able to
select or turn on/off preferred features of your microTALK
When scrolling through the Mode Functions, your radio features
will be displayed in the following order:
Set CTCSS Privacy Codes
Lock/Mode Button
Set VOX On/Off
Set VOX Sensitivity Level
Set Memory Locations
Set Channel Scan
Set CTCSS Privacy Code Scan
Set Memory Location Scan
Set Call Alert Tone Signal
Set Roger Beep On/Off
Set Keystroke Tones On/Off
Scroll through the mode functions using the Lock/Mode button.
Each press and release of the Lock/Mode button will advance to the
next mode function. Press the Talk button at any point to return the
radio to Standby mode.
10 English
Introduction
CTCSS Privacy Codes
•
CTCSS (Continuous Tone Coded Squelch System) is an advanced
® radio. tone coding system allowing you to select one of 38 privacy codes
to reduce interference from other users on the channel.
Lock/Mode Button
CTCSS Privacy Code
Channel Buttons
Operation Customer Assistance Warranty
If you are using a privacy code, both radios must
be tuned to the same channel and privacy code to
communicate. Each channel will remember the
last privacy code you selected.
To select a privacy code:
1. After selecting a channel, press
the Lock/Mode button until the small
numbers next to the channel number
flash on the display.
2. Press using the Channel Up or Channel Down
button to select a privacy code. You can hold
the Up or Down button for fast advance.
3. When your desired privacy code is displayed,
choose one of the following:
a. Press the Lock/Mode button to enter the
new setting and proceed to other functions.
b. Press the Hi•Low/Enter button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds
to enter the new setting and return to
Standby mode.
Nothing Comes Close to a Cobra
•
® 11