Magellan MobileMapper MobileMapper 6 Getting Started Manual page 19

For some applications, you may have to copy the setup file to
MobileMapper 6. In this case, follow the instructions below:
• From the Mobile device window, navigate to the computer
drive and folder containing the software to install.
• Copy the file or files needed for the software installation.
• Navigate to the Mobile Device and paste the files in one
of your folders. If you want to paste the files on the SD
card, if there is one, first double-click "My Windows
Mobile-Based Device" and then "Storage Card" before
pasting.
• Run the setup file and follow the instructions to complete
the installation. Make sure you install your program in the
non-volatile memory.
NOTE: If Vista is used on your computer, installing a new
software application on MobileMapper 6 from the computer
does not require additional software on the computer.
However, if a software installation fails, you will have to
install Windows Mobile Device Center on the computer (see
MobileMapper 6 Companion CD), then resume the
installation of your software application.
11