PC-086 Troubleshooting This Troubleshooting Guide walks you step-by-step through the diagnosis of PC-086 customer problems. It is important to follow these steps carefully, to ensure that the problem is diagnosed correctly, and therefore the appropriate repair action is taken. Getting Started To begin: 1.
Page 4
To Troubleshoot This Do the following: Issue Some sound is normal, due to the pads rubbing against the side of the chair. Do the following: 1. Reinstall the pads, ensuring that they are centered carefully during installation. 2. Check to see if there is less clearance between My chair makes a creaking/squeaking the backrest frame and the chair on one side of...
Step 3: If the chair is still not receiving power, replace the main PCB box and the power cord. Electric Recline The chair will only move in one direction. If the chair will either recline or incline, but not both, it is possible that the electric recline cable connection to the armrest is not secure.
Page 6
The wave function does not work at all. Assuming you have verified that the chair is receiving power, if the wave function does not work in either the backrest or the seat, replace the air compressor assembly. The wave function works in the seat but not in the backrest (or vice versa).
Page 8
Human Touch, LLC 3030 Walnut Ave. Long Beach, CA 90807 www.humantouch.com...