01 SPROCKET GUARD / CHAIN TENSIONING SYSTEM
1
Remove the sprocket guard, bar, and chain.
Chain tensioner
Carefully pull the chain guide plate off the
front bar pin 1 .
Chain tensioner function
An angled worm drive converts the turns of
the adjustment screw 2 to forward or
backward motion of the tensioning pin 3.
Reparaturanleitung PS-4600 / PS-5000
Repair Manual PS-32
4
If necessary, turn adjusting screw 2 clockwise,
until the fastening screw 4 is accessible.
Unscrew the fastening screw and pull the
chain tensioner up and out.
2
3
Assembly
Grease spindle and worm gear with multi-
purpose grease (944.360.000).
8