Carburetor - Makita DOLMAR PS-32C Repair Manual

08 CARBURETOR

2
ON
1
Removing the intake manifold and
carburetor
CAUTION: Completely empty the fuel tank
before disassembling the carburetor!
Remove cover.
Move combination switch 1 to safety position.
Unscrew 2 screws 2.
Remove the air filter and intake manifold 3.
Pull the fuel lines and pulse line from the
carburetor.
CAUTION: There is fuel in the line. Catch
escaping fuel with a cloth.
Remove the carburetor and throttle linkage.
Note: When reassembling, engage the
linkage in the marked hole (arrow).
Reparaturanleitung PS-4600 / PS-5000
Repair Manual PS-32
3
Removing the intermediate flange
Disengage the combination switch 1.
Remove the front handle to simplify pulling off
the cylinder.
Unscrew the spark plug.
Unscrew screws 9.
Unscrew screws 4 from the crankcase.
Turn the flywheel so that the magnets are
NOT on the ignition armature.
Pull the cylinder, intermediate flange and
ignition armature up and off.
Note: Before assembly, replace the
crankcase gasket with crankshaft seal rings.
4
11
Assembly
Bring piston to top dead centre and position
the opening on the piston ring to the piston
ring lock.
Hold the piston firmly with one hand and
carefully push the piston over it.
___
19