Vibration Damper - Makita DOLMAR PS-32C Repair Manual

09 VIBRATION DAMPER

___
Disassembly
Springs 1 and 2
Remove the sprocket guard.
Loosen and remove screws with Torx
screwdriver (chap. 00 pos. 1).
4
Pull out damping spring.
Spring 3
3
Remove starter housing (see chap. 06).
Loosen and remove screws with Torx
screwdriver (chap. 00 pos. 1).
Pull out damping spring.
Spring 4
Loosen and remove screws with Torx
screwdriver (chap. 00 pos. 1).
Remove damping spring.
Remove spring bush.
Note: During assembly, insert spring retainer
between the cushion spring and the cylinder.
Screw the metric-thread screw into the
cylinder.
1
2
Reparaturanleitung PS-4600 / PS-5000 22
Repair Manual PS-32