Memory Locations - Cobra microTALK PR3500DX Owner's Manual

Mode Functions
Operation
Main Icons
Intro Operation Customer

10 Memory Locations

Assistance
Your microTALK ® radio has 10 Memory Locations for storing
your most frequently used channels and channel/privacy code
combinations. These Memory Locations can be selected individually
or can be scanned. (See page 16 for memory location scan.)
To program a memory location:
Intro Operation
Mode/Lock Button
Secondary Icons
1. Press the Mode/Lock button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down
Memory Icon
Secondary Icons button to select the memory location
(0 through 9).
Notice
Channel Buttons
Notice
3. Press the Enter/Hi•Low button to enter
a new memory location or edit an already
Enter/Hi•Low Button programmed memory location. The channel
numbers will flash on the display.
4. Press the Channel Up or Channel Down
button to select a channel (1 through 22).
5. Press the Enter/Hi•Low button. The privacy
code numbers will flash on the display.
6. Press the Channel Up or Channel Down
button to select a privacy code (00 to 38).
7. Choose one of the following:
a. Press the Enter/Hi•Low button to enter the channel/privacy
code in the selected memory location and return to the
beginning of memory location options.
b. Press the Mode/Lock button to enter the channel/privacy
code in the selected memory location and proceed to other
functions on the channel/privacy code displayed before
you entered mode functions.
c. Press the Talk button to enter the channel/privacy code in
the selected memory location and return to Standby mode
on the selected memory location.
10 English
Warranty
Customer Warranty
Assistance
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
Main Icons
Introduction
While setting a memory location, if you do not press any buttons
•
for 15 seconds, your radio will automatically return to Standby
mode on the channel/privacy code displayed before you entered
mode functions.
Intro
Main Icons
Mode/Lock Button
Secondary Icons
Memory Icon
Secondary Icons
Intro
Channel Buttons
Secondary Icons
Operation
Customer Assistance Warranty
Intro Operation Customer
Assistance
Operation To recall a stored memory channel location: Customer Warranty
Assistance
1. Press the Mode/Lock button until the Memory
icon and the memory location number flash
on the display.
2. Press the Channel Up or Channel Down
button to select a memory location
Operation Customer Warranty
(0 through 9).
Assistance
Notice
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
Notice
3. Press the Talk button to return to Standby
mode on the selected memory location.
A memory location can be reprogrammed
at any time it is displayed. Press the
Enter/Hi•Low button to begin.
Notice
While recalling a stored memory location,
if you do not press any buttons for 15 seconds,
your radio will automatically return to Standby
mode on the channel/privacy code displayed
before you entered mode functions.
Nothing comes close to a Cobra
Warranty
® 11