Channel Scan - Cobra microTALK PR3500DX Owner's Manual

Mode Functions
Operation
Intro Operation Customer
To de-program a memory location:
Intro Operation
Mode/Lock Button
Assistance
1. Press the Mode/Lock button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down
Memory Icon
Secondary Icons button to select the memory location
Secondary Icons
(0 through 9).
Channel Buttons
Notice
3. Press the Enter/Hi•Low button. The channel
Notice
numbers will flash on the display.
Enter/Hi•Low Button
4. Press the Channel Up or Channel Down
button to select Channel 0.
5. Choose one of the following:
a. Press the Enter/Hi•Low button to enter
Channel 0
the channel/privacy code in the selected
memory location and return to the
beginning of memory location options.
b. Press the Mode/Lock button to
enter the channel/privacy code in
the selected memory location and
proceed to other functions on the
channel/privacy code displayed
before you entered mode functions.
While de-programming a memory location,
if you do not press any buttons for 15 seconds,
your radio will automatically return to Standby
mode on the channel/privacy code displayed
before you entered mode functions.
12 English
Warranty
Customer Warranty
Assistance
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
Main Icons
Operation
Introduction
Intro Operation

Channel Scan

Your microTALK ® radio can automatically scan channels.
Intro Operation Customer
Assistance
To scan channels:
Mode/Lock Button
1. Press the Mode/Lock button until the
Scan icon and the channel numbers
flash on the display.
Secondary Icons
Secondary Icons
2. Press the Channel Up or Channel Down
Scanning Channels
button to begin scanning channels.
The radio ignores specific privacy
codes while scanning channels.
Channel Buttons
Notice
The Scan icon will continue to be displayed Notice
when scan is on. Your radio will continue to
scan all channels and stop if an incoming
transmission is detected. Your radio will
remain on that channel for 10 seconds.
While setting channel scan, if you do not
press any buttons for 15 seconds, your radio
will automatically return to Standby mode on
the channel or channel/privacy code displayed
before you entered mode functions.
During channel scan (while receiving an incoming
transmission), you can choose from the following:
a. Press and hold the Talk button to
communicate on that channel. Your radio
will remain on that channel and return
to Standby mode.
b. Press the Channel Up or Channel Down
button to resume scanning channels.
If you press the Talk button while scanning,
but more than 10 seconds after receiving a
transmission, you will transmit on the channel
on which you last received a transmission.
This will return the radio to Standby mode.
If you do not press any button within
10 seconds after receiving a scanned
transmission, your radio will automatically
resume scanning channels.
Customer Assistance Warranty
Customer Warranty
Assistance
Warranty
Nothing comes close to a Cobra ®
•
13