Cobra microTALK PR3500DX Owner's Manual page 7

o Operation Customer Warranty
Mode Functions
Assistance
Operation
Intro Operation Customer
CTCSS Privacy Codes
Assistance
CTCSS (Continuous Tone Coded Squelch System) is an advanced
ons
tone coding system allowing you to select one of 38 privacy codes
to reduce interference from other users on the channel.
If you are using a privacy code, both radios must
be tuned to the same channel and privacy code to
Secondary Icons
communicate. Each channel will remember the
Notice
last privacy code you selected.
To select a privacy code:
Mode/Lock Button
1. After selecting a channel, press
the Mode/Lock button until the small
Notice
numbers next to the channel number
flash on the display.
Privacy Code
2. Press using the Channel Up or Channel Down
button to select a privacy code. You can hold
the Up or Down button for fast advance.
3. When your desired privacy code is displayed,
Channel Buttons
choose one of the following:
a. Press the Mode/Lock button to enter the
new setting and proceed to other functions.
b. Press the Enter/Hi•Low button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds
to enter the new setting and return to
Standby mode.
English
8
Warranty
Introduction
Voice Activated Transmit (VOX)
•
In VOX mode, your microTALK
automatically transmitting when you speak. You can set the VOX
sensitivity level to fit the volume of your voice and avoid
transmissions triggered by background noise.
Mode/Lock Button
Secondary Icons
VOX Icon
Main Icons
Channel Buttons
Intro
Mode/Lock Button
Secondary Icons
VOX Sensitivity Level
Channel Buttons
Operation
Customer Assistance Warranty
Intro Operation Customer
Assistance
® radio can be used "hands-free,"
To turn VOX mode on or off:
1. Press the Mode/Lock button until the VOX
icon flashes on the display. The current on
or off setting is displayed.
2. Press the Channel Up or Channel Down
button to turn VOX on or off.
3. Choose one of the following:
Notice
a. Press the Mode/Lock button to enter the
selected on or off setting and proceed to
other functions.
Operation b. Press the Enter/Hi•Low button to enter Customer Warranty
Assistance
the selected on or off setting and return
to Standby mode.
To set VOX sensitivity:
1. Press the Mode/Lock button until the VOX
icon flashes and the current sensitivity level
is displayed.
The current sensitivity level is displayed
with letters "LE" and a Number 01
through 05, with Number 05 being the
Notice
most sensitive level and Number 01
being the least sensitive level.
2. Press the Channel Up or Channel Down
button to change the setting.
3. Choose one of the following:
a. Press the Mode/Lock button to enter
the selected setting and proceed to
other functions.
b. Press the Enter/Hi•Low button to
enter the selected setting and return
to Standby mode.
Nothing comes close to a Cobra
Warranty
•
® 9