Siemens SmartGear IE User Manual page 3

8.2.3 I4t-Curve for L
8.2.4 Phase Loss Sensitivity
8.2.5 Thermal Memory
8.2.6 S-Trip (ISD)
8.2.7 Delay Time (tsd)
8.2.8 I2t-Curve for S
8.2.9 I-Trip (Ii)
8.2.10 N-Protection (IN)
8.2.11 Ground Fault (Ig)
8.2.12 Delay Time (tg)
8.2.13 I2t-Curve for G
8.2.14 Ground Fault Alarm (Ig2)
8.2.15 Load Management
8.3 Protection Function Limits
8.4 Threshold Alarms
8.4.1 Threshold Alarms
9. Optional Devices
9.1 Source Metering
9.1.1 Trending
9.2 Surge Protective Devices (SPD)
9.3 Door Monitoring
9.4 Trip Coil Monitoring
9.5 GPS Time Sync
9.6 HRG
9.7 Temperature Monitoring
10. Autothrowover
10.1 Autothrowover Definition
10.2 Configurations
10.3 System Control
10.3.1 Standard Control Features
10.3.2 Optional Control Features
10.4 Autothrowover Components and Features
10.4.1 Standard Components and Features
10.4.2 Optional Components and Features
10.5 Setpoints/Controls Screen
10.5.1 Timer Setpoints
10.5.2 Selector Switches
10.5.3 Protective Relays
10.5.4 Load Test
10.6 Sequence of Operation
10.6.1 Automatic Mode
10.6.1.1 Loss of Primary
10.6.1.2 Return to Primary - Standard Open Transition
10.6.1.3 Return to Primary - Optional Closed Transition
10.6.2 Manual Mode
10.6.2.1 Standard Open Transition
10.6.2.2 Optional Closed Transition
43 10.7 Optional System Capabilities
44 10.7.1 Load Shedding and Load Prioritization
44 10.7.2 Peak Shaving
44 10.8 Test Sequences
44 10.8.1 Main-Tie-Main or Main-Main Configuration
44 10.8.1.1 Standard Main-Tie-Main or Main-Main Configuration
44 10.8.1.2 Optional Main-Tie-Main or Main-Main Configuration
44 10.8.2 Main-Generator Configuration
44 10.8.2.1 Standard Main-Generator Configuration
44 10.8.2.2 Optional Main-Generator Configuration
44 11. Upper Level System Tie-In
44 12. Service & Support
44 13. Appendix
44
45
45
46
46
46
46
46
46
46
47
48
49
49
49
49
49
49
49
49
50
50
50
50
51
51
51
51
51
51
51
52
52
52
Sm@rtGear™ IE User Manual
52
52
52
52
52
52
53
53
53
54
55
56
56
ii