Firmware Version 2/2 Screen; Ip Network Screen - Panasonic AW-UE150KP Operating Instructions Manual

Camera menu items (continued)

Firmware Version 2/2 screen

F i r m w are Ver sion 2 /2
E E P R O M
M a i n / N e t wor k
I n t e r f a c e
F P G A
C O M
A V I O
R e t u r n
EEPROM
Main/Network
Display the EEPROM version of the main/network.
Interface
Display the EEPROM version of the interface.
FPGA
COM
Display the FPGA version for communications.
AVIO
Display the FPGA version for image processing.
Return
Return to the previous menu level.

IP Network screen

V 01.00
V 01.00
V 01.00
V 01.00
IP Address
Set the IP address for this unit.
The set value is applied to this unit when [Set Execute] is executed.
Subnet Mask
Set the subnet mask for this unit.
The set value is applied to this unit when [Set Execute] is executed.
Default Gateway
Set the default gateway for this unit.
The set value is applied to this unit when [Set Execute] is executed.
Set Execute
Apply the values set in [IP Address], [Subnet Mask], and [Default
Gateway] to this unit.
Return
Return to the previous menu level.
<NOTE>
• The IP Network cannot be changed while the DHCP function is On.
• If the DHCP function is not to be used, change the setting for
[DHCP] to [Off] in the network settings screen of your web browser.
(→ page 132)
75
I P N e t w o r k
I P A d d r e s s
S u b n e t M a s k
D e f a u l t G a t e w a y
S e t E x e c u t e
R e t u r n
1 9 2 . 1 6 8 . 0 . 1 0
2 5 5 . 2 5 5 . 2 5 5 . 0
1 9 2 . 1 6 8 . 0 . 1