Firmware Burning Procedure After Core Module Replacement Flow - Denon HEOS Amp HS2 Service Manual

5. Firmware burning procedure after Core Module replacement flow

Core Module replacement.
Checking
- Player serial number.
Old Core Module's
- WiFi MAC address.
New Core Module's
- WiFi MAC address.
Power On
Network cable is unplugged.
Check the Front
LED Color
Solid Purple
Writing the latest firmware.
Insert USB memory.
Writing
See "2.Updationg by USB".
Remove the USB memory.
Automatically restart the
system.
The body of the illustrations is HEOS5 model. LED color is common.
Change Region Setting.
Insert USB memory.
Writing
See "3.Service region
settings update procedures".
Remove the USB memory.
Power cycle.
Change Release Type.
Insert USB memory.
Writing
See "4. Release Type settings
update procedures".
Remove the USB memory.
Power cycle.
Connect to the Network.
Launch HEOS Application.
Check Firmware Version,
Region, and Release Type.
Finish
22
Blue blink
Blue blink