Table of Contents
Advertisement
Commissioning | Digital axis control VT-HMC...1X
10. To upload the PLC application to the VT-HMC...1X, select menu item "Debug >
Login" and confirm the subsequent dialog by clicking "Yes".
11. This transmits the PLC application to the VT-HMC...1X.
12. Save the project by selecting menu item "File > Save".
Further information on the operation, engineering, programming and diagnostics
of the VT-HMC...1X by means of IndraWorks can be found in the help menus
of the program (→ e.g. "Drive Help > HYDRV*-HDx-18VRS" for firmware version
HDx18VRS).
8.5
COMMISSIONING SOFTWARE INDRAWORKS DS OR MLD
For commissioning and later operation, the PC program IndraWorks is available to
the user. It serves for parameterization, diagnostics and programming of the VT-
HMC...1X.
Operating principle, menus and dialog windows are adapted to the individual
variants of the VT-HMC...1X.
IndraWorks features the following functions:
• Comfortable dialog functions for parameterization
• PLC program creation according to IEC 61131-3 (IndraWorks MLD required)
• Comprehensive options for displaying process variables
• Recording and graphical representation of up to 8 process variables with wide
selection of trigger options
• Dialog window for the simple configuration of the data exchange (PROFIBUS DP,
PROFINET RT, EtherCAT, EtherNet/IP, POWERLINK) with a higher-level control
The PC program "IndraWorks" is not included in the scope of delivery of the VT-
HMC...1X.
Download on the Internet: www.boschrexroth.com/hmc
RE 30239-B, Edition 01.2021, Bosch Rexroth AG
27/36
Advertisement
Table of Contents
