Bundled Software Installation; Set Up The Audio System - ECS P4S8A Manual

Installing under Windows NT or Manual Installation
If you are under Windows NT, the auto-installing program doesn't
work out; or you have to do the manual installation, please follow
this procedure while the Auto Setup screen pops out after inserting
the support CD-ROM:
1. Click the ReadMe to bring up a screen, and then click the
Install Path at the bottom of the screen.
2. Find out your mainboard model name and click on it to obtain
its correct driver directory.
3. Install each software in accordance with the corresponding
driver path.

Bundled Software Installation

All bundled software available on the CD-ROM is for users'
convenience. You can install bundled software as follows:
1. Click the Application button while the Auto Setup screen pops
out after inserting the support CD-ROM.
2. A software menu appears. Click the software you want to install.
3. Follow onscreen instructions to install the software program step
by step until finished.

Set Up the Audio System

Set up the Audio configuration of 2-channel, 4-channel and 6-
channel speaker-out system through the audio driver. It also
provides users with Xear Technology, the virtual rear sound effect
compensation for any multi-channel audio systems simply by using
a pair of open-aired headphones.
 An ear/headphone-like device, capable of delivering the rear
audio in a multi-channel audio system.
 Structurally comprising two housing units for receiving the rear
signal, wherein the housings are opposite each other. Both
housing units may be joined by a headband or other unification
device.
 Open-aired design, allowing the listener to perceive the front
signal at the same time.
4: Software & Applications
41