Bundled Software Installation - ECS A13G Series User Manual

Note: To install the CNR card driver, please select the "Modem" item manually
after the Auto Setup. Click on "Next >" and the CNR card driver will be
installed automatically.
3 The support software will automatically install.
Once any of the installation procedures start, software is automatically installed
in sequence. You need to follow the onscreen instructions, confirm commands
and allow the computer to restart as few times as needed to complete installing
whatever software you selected. When the process is finished, all the support
software will be installed and start working.
Installing under Windows NT or Manual Installation
If you are under Windows NT, the auto-installing program doesn't work out; or
you have to do the manual installation, please follow this procedure while the
Auto Setup screen pops out after inserting the support CD-ROM:
1 Click the ReadMe to bring up a screen, and then click the Install Path
at the bottom of the screen.
2 Find out your mainboard model name and click on it to obtain its
correct driver directory.
3 Install each software in accordance with the corresponding driver
path.

Bundled Software Installation

All bundled software available on the CD-ROM is for users' convenience. You
can install bundled software as follows:
1 Click the Application button while the Auto Setup screen pops out
after inserting the support CD-ROM.
2 A software menu appears. Click the software you want to install.
3 Follow onscreen instructions to install the software program step by
step until finished.
Chapter 4: Software & Applications
43