Samsung ProXpress M403 Series User Manual page 29

Menu overview
Network
(see "Network" on page 240)
TCP/IP (IPv4) Protocol Management
DHCP
NFC
BOOTP
Network Configuration
Static
Clear Settings
TCP/IP (IPv6)
IPv6 Protocol
DHCPv6 Config
Ethernet
Ethernet Port
Ethernet Speed
802.1x
c
Wi-Fi
Wi-Fi On/Off
Wi-Fi Settings
WPS
Wi-Fi Direct
Wi-Fi Signal
CLR Wi-Fi set.
a. This option is available when the optional memory installed or RAM Disk is checked. To use Ram disk, click Samsung Printer Center > Device Options and then check RAM Disk (see "Using
Samsung Printer Center" on page 196).
b. You need to enter the password to access this menu. The default password is sec00000.
c. This option is available when the optional Wireless/NFC kit installed.
d. This option is available when the System Setup > Maintenance > RAM Disk is enabled.
(see "Direct USB" on page 241)
Print From
c File Manage
Show Space
Direct USB
(see "Job Management" on page 242)
Active Job
Secured Job
Stored Job
a
Job Management
(see "Admin Setup" on page 243)
Stamp
Change Admin Password
Firmware Upgrade
Import Setting
Export Setting
Secure Print
Supplies Management
2. Menu Overview and Basic Setup
b
Admin Setup
Stamp Activate
Item
Text Size
Opacity
Position
d
Toner Low Alert
29