Advertisement
Bridge LED Indicators
Figure 1
1
Ethernet LED
2
Status LED
When the bridge is initially powered-up, installation mode is activated and the bridge attempts to
associate to a root bridge for 60 seconds. If it is unable to associate with a root bridge, it automatically
assumes the root bridge role. The Install LED provides bridge association status during installation mode
as shown in
Table 3-2
Install LED
Off
Amber blink
Amber solid
Green blink
Green solid
1. Pre-configured bridges search indefinitely.
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
3-4
D R A F T - C I S C O C O N F I D E N T I A L
LED and Connector Locations
Table
3-2.
Install LED Association Status
State
Self test
Non-root, searching
Non-root, associated
Root, searching
Root, associated
Chapter 3
3
1
2
3
Radio LED
4
Install LED
Bridge State
Startup
Not associated (non-root mode). The
bridge attempts to associate with a root
1
bridge for 30 seconds
.
Associated (non-root mode)
Not associated (root mode). The bridge
attempts to associate with a non-root
bridge indefinitely.
Associated (root mode)
Mounting and Alignment Overview
4
OL-4072-01
Advertisement
Chapters
