Advertisement
Bridge Specifications
Figure 1-4
Point-to-Multipoint Configuration
The point-to-multipoint configuration
multiple remote LAN networks.
Figure 1-5
Bridge Specifications
The bridge, power injector, and power module specifications are listed in
Table 1-1
Bridge, Power Injector, and Power Module Specifications
Category
Size
Indicators
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
1-6
D R A F T - C I S C O C O N F I D E N T I A L
Port Aggregation or Redundancy Bridge Configuration
Point-to-Multipoint Bridge Configuration
Bridge
Integrated antenna configuration:
11.6 in. W x 11.6 in. H x 3.6 in. D
29.46 cm W x 29.46 cm H x 9.14 cm D
External antenna configuration:
11.4 in. W x 11.4 in. H 4.2 in. D
28.96 cm W x 28.96 cm H 10.67 cm D
Four indicators on the back panel: Installation and
Alignment Mode, Ethernet traffic, bridge status, and
radio traffic
Bridge
Bridge
(Figure
1-5) is used to interconnect the main LAN network to
Bridge
Chapter 1
Bridge
Bridge
Bridge
Bridge
Table
1-1.
Power Injector
Power injector:
6.25 in. W x 6.38 in. H x 1.31 in. D
15.88 cm W x 16.21 cm H x 3.33 cm D
Power module:
6.0 in. W x 2.75 in. H x 1.75 in. D
15.24 cm W x 6.99 cm H x 4.45 cm D
Three indicators on the front panel: Uplink
activity, injector status, Ethernet activity
One indicator on the side panel: Power
Overview
OL-4072-01
Advertisement
Chapters
