MSI MS-7043 User Manual page 29

MS-7043 ATX Mainboard
[Colonel]
[General]
[Commander]
MSI Reminds You...
1. Even though the Dynamic Overclocking Technology is more stable
than manual overclocking, basically, it is still risky. We suggest
that users make sure that the CPU can afford to overclocking regu-
larly first. If you find the PC appears to be unstable or reboot
incidentally, it's better to disable the Dynamic Overclocking or to
lower the level of overclocking options. By the way, if you need to
conduct overclocking manually, you also need to disable the Dy-
namic OverClocking first.
2. Meanwhile, there are two functions to protect user's system from
crashing.
-
-
CPU Ratio Selection
This setting controls the multiplier that is used to determine the internal clock speed of
the processor relative to the external or motherboard clock speed.
CPU FSB Clock
This setting shows the current CPU Front Side Bus clock frequency.
DRAM Clock
Use this field to configure the clock frequency of the installed DRAM. Setting options:
FSB100: [By SPD], [DDR 266 (3:4)], [DDR 333 (3:5)], [DDR 400 (1:2)], [DDR
433], [DDR 450], [DDR 466], [DDR 500]
FSB133: [By SPD], [DDR 266 (1:1)], [DDR 333 (4:5)], [DDR 400 (2:3)], [DDR
433], [DDR 450], [DDR 466], [DDR 500]
FSB200: [By SPD], [DDR 266 (3:2)], [DDR 333 (6:5)], [DDR 400 (1:1)], [DDR
433], [DDR 450], [DDR 466], [DDR 500]
MSI Reminds You...
The value plus a ratio (CPU: DDR) with parentheses means the non-
synchronous overclocking.
DRAM Frequency
This setting shows the current frequency of DDR DRAM (read only).
AGP Frequency (MHz)
This item is used to configure the AGP frequency.
3-4
4th level of overclocking.
5th level of overclocking.
6th level of overclocking.
There is a safe key "Ins" in BIOS. In case the overclocking
fails, you can press "Ins" key while system rebooting to re-
store to the BIOS defaults.
If the system incidentally reboot for four times, the BIOS will
also be restored to the defaults.