MSI MS-6567 User Manual page 86

Appendix A
4.
The following window appears.
5.
Select the multi-channel operation you prefer from No. of Speakers.
6.
Select the audio device that you wish to use as audio output connectors.
There are two options for this:
Refer to "Using BACK PANEL connectors only" earlier in
the section for how to attach speakers.
Refer to "Using S-BRACKET connectors" earlier in the
section for how to attach speakers.
7.
Click OK.
Note:
It is useless to select "Use S-Bracket" if your motherboard
does not support or have the S-Bracket installed in the system.
Make sure Use S-Bracket is NOT selected if
you want to use audio connectors on the back
panel only.
Select Use S-Bracket if you want to use audio
connectors supplied by the connected S-
Bracket.
A-10