Chapter 3
Set Wake Up Events
Press <Enter> to enter the sub-menu and the following screen appears:
Wake Up On Ring, Wake Up On PME#, Resume on PS/2 Mouse, PS/
2 MOUSE Wake Select Mode, USB Wakeup From S3
These items specify whether the system will be awakened from power
savingh modes when activity or input signal of the specified hardware
peripheral or component is detected.
Note 1: You need to install a modem supporting power on function
for Wake Up On Ring function.
Note 2: If you change these settings, you must reboot the system until
it enters the operating system and then power off the system. By
doing so, the changed settings will come into effect next time when
you power on the system.
Note 3: You can specify the mouse wakeup method in the "PS/2
MOUSE Wake Select Mode" . After you have selected the mode and
enabled the "Resume on PS/2 Mouse" function, you need to use the
specified mode for the system to resume on PS/2 Mouse.
Keyboard PowerOn Function
3-16