MSI MS-6441 User Manual page 28

M S-6441 Barebone
Serial ATA Connectors: SATA1 / SATA2
These connectors are high-speed Serial ATA interface port. Each connector can
connect to one Serial ATA device.
Fan Power Connectors: CPU_F1 / SYS_F1
The CPU_F1 (processor fan) and SYS_F1 (system fan) support system cooling fan
with +12V. It supports three-pin head connector. W hen connecting the wire to the
connectors, always take note that the red wire is the positive and should be con-
nected to the +12V, the black wire is Ground and should be connected to GND. The
mainboard has a Super I/O to detect CPU/fab temperature, you must use a specially
designed fan with speed sensor to take advantage of the CPU fan control.
Important
Please refer to the recommended CPU fans at processor's official
website or consult the vendors for proper CPU cooling fan.
2-10
SATA1 / SATA2
GND Sensor
+12V +12V
Sensor GND
CPU_F1 SYS_F1