MSI MS-6441 User Manual page 57

M S-6441 Barebone
- Boot Settings Configuration -
Quick Boot
Setting the item to [Enabled] allows the system to boot within 5 seconds since
it will skip some check items.
Full Screen Logo Display
This item enables you to show the company logo on the bootup screen. Set-
tings are:
[Enabled]
[Disabled]
Wait For 'F1' If Error
This BIOS feature controls the system's response when an error is detected
during the boot sequence. W hen enabled, the BIOS will halt the boot sequence
when an error is detected. You will need to press the F1 button at this point. It
brings you to the BIOS setup menu where you can adjust the settings to fix the
problem. W hen disabled, the BIOS will not halt the boot sequence, even when
an error is detected. The system will continue to boot into the operating system.
Boot Device Priority
Press <Enter> and the following sub-menu appears:
- Boot Settings Configuration -
1st / 2nd Boot Device
These items allow you to set the s equence of boot devices where BIOS
attempts to load the operating system.
4-14
Shows a still image (logo) on the full screen at boot.
Shows the POST messages at boot.