Table of Contents
Advertisement
On-Chip Primary/Secondary PCI IDE
The chipset contains a PCI IDE interface with support for two IDE channels.
Select [Enabled] to activate the IDE interface. Select [Disabled] to deactivate
this interface.
**On-Chip Serial ATA Setting**
On-Chip Serial ATA
This setting is used to specify the SATA controller. Settings: [Disable], [Auto],
[Legacy Mode], [Native Mode]. If [Legacy Mode] is selected, PATA and SATA
will be combined. If [Native Mode] is selected, PATA and SATA will both be
enabled. If [Auto] is selected, PATA and SATA will be arranged by BIOS, and
you will be able to see the IDE Device status listed in Standard CMOS Features.
Serial ATA Port 0 Mode
When On-Chip Serial ATA is set to [Legacy Mode], setting options will show as
follows:
1.
[Primary Master]
Serial ATA Port 0 will be set to Primary Master.
2.
[Primary Slave]
Serial ATA Port 0 will be set to Primary Slave.
3.
[Secondary Master]
Serial ATA Port 0 will be set to Secondary Master.
4.
[Secondary Slave]
Serial ATA Port 0 will be set to Secondary Slave.
When On-Chip Serial ATA is set to [Native Mode], setting options will show as
follows:
1.
[SATA1 Master]
Serial ATA Port 0 will be set to Native Mode Master.
2.
[SATA1 Slave]
Serial ATA Port 0 will be set to Native Mode Slave.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Setting BIOS Function
3-15
Advertisement
Table of Contents
