Table of Contents
Advertisement
Chapter 3
Run VGABIOS if S3 Resume
When Sleep State is set to [S3] or [Auto], users can select the options in this
field. Selecting [Yes] allows BIOS to call VGABIOS to initializet he VGA card
when system wakes up (resumes) from S3 sleep state. The system resume time
is shortened when you disable the function, but system will need an AGP driver
to initialize the VGA card. Therefore, if the AGP driver of the card does not
support the initialization feature, the display may work abnormally or not func-
tion after resuming form S3. Options: [Auto], [Yes], [No].
Wake Up On PME
When set to [Enabled], the feature allows your system to be awakened from
the power saving modes through any event on PME (Power Management
Event). Settings: [Enabled], [Disabled].
USB Wake-Up From S3
This item allows the USB device to wake up the system from S3 sleep state.
Settings: [Enabled], [Disabled].
PS/2 KB/MS Wake-Up from S3
This setting allows you to enter "Any Key" (max. 8 numbers) to wake up the
system from S3 state. Settings are: [Hot Key] and [Disable].
Resume By Alarm
The field is used to enable or disable the feature of booting up the system on a
scheduled time/date.
Date(of Month) Alarm
The field specifies the date for Resume By Alarm. Settings: [0]~[31].
Time(hh:mm:ss) Alarm
The field specifies the time for Resume By Alarm. Format is <hour>
<minute><second>.
3-20
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Advertisement
Table of Contents
