Husqvarna 225i Operator's Manual page 37

Recommended cutting equipment for
USA
Following is a list of recommended cutting equipment
for Husqvarna 225i. This model equipped with either
of the listed guide bar and saw chain combination(s),
fulfills the requirements according to UL 62841-1 and UL
62841-4-1.
Chainsaw model Husqvarna 225i met the kickback
performance requirements of UL 62841-4-1 when
tested with the combinations of bars and saw chains
listed below. The saw chain Husqvarna H38 is also
classified as a low kickback saw chain since is met
the requirements for low kickback saw chain outlined
in ANSI B175.1. We recommend to use only the listed
combinations of bars and saw chains for chainsaw
model Husqvarna 225i. Other chainsaw models may not
meet the kickback requirements when equipped with the
listed bar and saw chain combinations.
Recommended cutting equipment for
Canada
Following is a list of recommended cutting equipment
for Husqvarna 225i. The listed combination(s)
11/64 in/4.5
38
mm
Approved batteries
Battery
Type
Battery capacity, Ah
Nominal voltage, V
Weight, lb/kg
Approved battery chargers for the product
Battery charger
Mains voltage, V
1860 - 001 - 23.09.2022
of powerhead, guide bar and saw chain meet
all requirements outlined in Canadian Standards
Association Z62.1-11 (Chain saws) and Z62.3-11 (Chain
Saw Kickback).
Furthermore the saw chain Husqvarna H38 is evaluated
and listed as a Type C Low Kickback Saw chain
according to the provisions in Z62.3-11.
Filing equipment and filing angles
Use a Husqvarna file gauge to sharpen the saw chain.
A Husqvarna file gauge makes sure that you get the
correct filing angles. The part numbers are given in the
table below.
If you are not sure how to identify the type of saw chain
on your product, refer to for more information.
75° 30°
BLi22
Lithium-ion
4.0
36
2.6/1.2
0.025 in/ 505 69
0°
0.65 mm 81-03
40-C80
100-240
579 55
88-01
37