Table of Contents
Advertisement
Setting the date and time
When connected to M3 Edit & Play, the date and time will be set automatically to be the
same as on the computer.
Setting the battery type and automatic power off function
Battery Type
Auto Power Off
Disconnecting the M3 from M3 Edit & Play
Other M3 Edit & Play functions
· Checking the open space and remaining recordable time of the SD card loaded in the M3
· Checking the M3 firmware version
· Playing WAV files that were recorded by an M3 and stored on the computer
· Adjusting the stereo width* and volume of WAV files that were recorded by an M3 as
well as playing and exporting those files
*With M/S RAW format files only
· Normalizing and converting to 24-bit linear WAV format
See the Operation Manual for procedures to use M3 Edit & Play.
Select the type of batteries used in the M3.
The options are Alkaline (dry cell), Ni-MH (rechargeable) and Lithium (dry cell).
This can be set to turn the M3 off automatically if not used for a certain amount of time.
The options are 10 minutes, 60 minutes, 10 hours, and Off (Never).
The factory default setting of the M3 for the Auto Power Off function is 10 hours.
Disconnect the
USB cable.
USB Type-C
5
Advertisement
Table of Contents
